Brookfield DV2T Extra Viscometer Manual de usuario Pagina 90

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 95
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 89
Brookeld Engineering Labs., Inc. Page 90 Manual No. M13-167-B0614
Viscometer Will Not Return to Zero
Viscometerisnotlevel
• Checkwithspindleoutofthesample.
• Adjustthelaboratorystand.
Pivotpointorjewelbearingfaulty
• PerformanOscillationCheck*
RemovethespindleandturnthemotorOFF;selectdisplayto%torquemode.
Gentlypushupontheviscometercoupling.
Turnthecouplinguntilthedigitaldisplayreads10-15onthe%display.
Gentlyletgoofthecoupling.
Watchthedigitaldisplay;youshouldseea“run”ofnumbersnexttothe%;the
“run”ofnumbers shouldultimatelystopat0.0(+/-0.1).
IfthedigitaldisplaydoesnotreturntoZERO,theunitmostlikelyisinneedof
service.
• Performcalibrationcheck(seeAppendixF).
• ContactBrookeldEngineeringLaboratories,Inc.oryourBrookelddealerfor
repair(seeAppendixO).
*Thisproceduredoesnotapplytoinstrumentswithballbearingsuspension(seeSection
I.3).
Display Reading Will Not Stabilize
Specialcharacteristicofsampleuid.Thereisnoproblemwiththeviscometer.
• RefertoAppendixC.
Checkforerraticspindlerotation.
• Verifypowersupply
• ContactBrookeldEngineeringLaboratories,Inc.oryourBrookelddealerfor
repair.
Bent spindle or spindle coupling.
• ContactBrookeldEngineeringLaboratories,Inc.oryourBrookelddealerfor
repair.
Temperatureuctuationinsampleuid.
• Usetemperaturebathforcontrol.
Vista de pagina 89
1 2 ... 85 86 87 88 89 90 91 92 93 94 95

Comentarios a estos manuales

Sin comentarios