Brookfield DV-II+ Programmable Viscometer Manual de usuario descargar pdf (Pagina 32)

Brookfield Engineering Labs., Inc. Page 32 Manual No. M/97-164-F1102

Refer to Section IV for information on how to create B.E.V.I.S. programs on a PC which can be

downloaded to the DV-II+ Programmable Viscometer.

Press the ENTER/AUTORANGE key to download a B.E.V.I.S. program as shown in Figure 56:

LOAD TO SLOT#1

PRESS ENTER KEY

Figure 56

Select a number from one (1) to four (4) using the UP/DOWN ARROW keys assign a storage location

for the program to be downloaded.

Note: Remember to keep track of what program is in what slot. If you elect to

download a new program to an active slot, you will overwrite the program

currently residing in that slot. The programs are saved automatically when

the viscometer is turned off.

After selecting the slot number, press the ENTER/AUTORANGE key and the screen shown in Figure

56 changes as follows: the top line flashes while the bottom line disappears. This flashing screen

will be displayed for as long as it takes to download the program. At the end of the download, Figure

57 is displayed:

DOWNLOAD DONE TO

EXIT PRESS A KEY

Figure 57

If a PC is not attached, Figure 58 will be displayed:

B.E.V.I.S. ERROR

NO PC ATTACHED

Figure 58

A press of any key (except the MOTOR ON/OFF/ESCAPE key) will take the user back a level to Figure

56 where you may elect to download another program or, with a press of the MOTOR ON/OFF/ESCAPE

key, return to the screen of Figure 55.

III.3.6 Run a Program

In the Options menu, scroll to the screen shown in Figure 59:

DOWNLOAD A PROG

RUN A PROG

Figure 59

Press the ENTER/AUTORANGE key to run a B.E.V.I.S. program as shown in Figure 60:

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 74 75

Sin comentarios

Brookfield DV-II+ Programmable Viscometer Manual de usuario Pagina 32