Brookfield R/S CPS Rheometer Manual de usuario descargar pdf (Pagina 52)

BrookeldEngineeringLabs.,Inc. Page52 ManualNo.M08-218-B0212

The AC adapter unit of the R/S-CPS+ Rheometer permits operation of the rheometer with supply

voltages ranging from 100 to 240 VAC with frequencies from 50 to 60 Hz.

The main connecting cable supplied with the R/S-CPS+ Rheometer may not, in some cases, meet

the requirements of every country. It is absolutely necessary that you use a main connecting cable

that meets the specic requirements and regulations of the relevant country.

The following information explains the requirements that are to be taken into account when

choosing the main connecting cable.

Generalinformation

• The connecting cable must be permitted (authorized) in the country where it is used.

• The mains cable should be at least 2 m and at the most 3 m long.

USAandCanada

• UL-permission and CSA Certicate are required for the mains connecting cable.

• The following minimal requirements are valid for the cable:

- No. 18 AWG

- Type SV or similar

- 3-phase

• The cable must have a nominal rating of at least 10 A.

• The main plug of type NEMA 5-15P (15A, 125V) or NEMA 6-15P (15A, 250V) must

have grounding contact.

Japan

The following cable types and connection values are required in Japan:

• All parts of the cables (cable, socket and plug) must have brand name and registration

number according to the Dentori law.

• The following minimal requirements apply to the cable:

- 0.75 mm2, 2-phase

- Type VCT or VCTF

- 3-phase

• The cable must have a minimum nominal rating of 7 A.

• The mains plug must be a 2-pin plug with grounding contact according to the Japanese

Industrial Standard C8303 (15A, 125V).

 A.4 RequirementstotheACPowerConnectingCables

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 61 62

Sin comentarios

Brookfield R/S CPS Rheometer Manual de usuario Pagina 52