Brookfield DV2+Pro Viscometer Manual de usuario descargar pdf (Pagina 90)

Brookeld Engineering Labs., Inc. Page 90 Manual No. M03-165-F0612

No Connection

Transmit Data (TxD)

No Connection

High Speed Print

(Note 1)

High Speed Print

(Note 1)

Serial Ground

Analog Ground

Analog % Torque

(Note 2)

Analog Temperature

(Note 3)

DV-II+

Serial and Analog Outputs

Notes:

1. Placing a jumper across pins 4 and 9 causes the DV- II+ to output computer

data at a 3 line-per

-second rate. No jumper across pins 4 and 9 retains the

once-per

-second printer output rate.

2. This is a 0-1 volt d.c. output where 0 volts corresponds to 0% torque and

1 volt corresponds to 100 % torque with a resolution of 1 millivolt (0.1%).

3. This is a 0-3.75 volt d.c. output where 0 volts corresponds to -100

C and

3.75 volts corresponds to +275 C with a resolution of 1 millivolt (0.1°C).

Analog Output:

The analog outputs for temperature and % torque are accessed from the 9-pin connector located

on the rear panel of the DV-II+Pro. The pin connections are shown in Figure H-1.

Theoutputcable(PartNo.DVP-96Y)connectionsare:

RedWire: TemperatureOutput

BlackWire: TemperatureGround

WhiteWire: %TorqueOutput

GreenWire: %TorqueGround

Note: PleasecontactBrookeldEngineeringLaboratoriesoryourlocal

dealer/distributorforpurchaseoftheDVP-96Yanalogoutputcable.

Figure H-1

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 100 101

Sin comentarios

Brookfield DV2+Pro Viscometer Manual de usuario Pagina 90