Brookfield DV-III Ultra Rheometer Manual de usuario descargar pdf (Pagina 23)

Brookeld Engineering Laboratories, Inc. Page 23 Manual No. M/98-211-B0104

Brookeld Engineering Laboratories, Inc. Page 23 Manual No. M98-211-E0912

SPECIAL SPINDLE #2

NAME = D BB E

SMC = 1.000

SRC = 2.000

Figure II-14

To complete, enter 0 values for SMC and SRC.

The display may ask “ADD A SPINDLE”. You may press YES to repeat or NO to nish.

ADD A SPINDLE?

1 = YES 3 = NO

Figure II-15

If you press “3” NO, the display will ask “SAVE NEW SPINDLE?” Press the “1” YES to save or

press “3” NO.

SAVE NEW SPINDLES?

1 = YES 3 = NO

Figure II-16

The display will now say “SET UP COMPLETE”, turn power off.

You can edit any existing spindle entry names and spindle constants. If so, you will need to complete

the steps until you are prompted to “Save New Spindle”. For example, if you have three special

spindles entered and need to modify the second spindle, you will need to proceed through the third

spindle parameters by pressing “Enter” until prompted to “Save New Spindle”. This will then save

the modied spindle.

II.4 Direct Speed Entry

At this point, the user may choose to enter a speed by the so-called direct speed entry method.

Enter a valid speed in the range of 0.01 to 250 RPM by pressing the numeric keys successively.

The previously blank line 3 on the default display screen records the user’s new speed input as

depicted in Figure II-17:

RPM: 0.0 SPINDLE: 31

TEMP: 72.1°F PRTN

ENTER NEW RPM: 11_

TORQUE = 0.0 %

Figure II-17

Here, the user intends to enter a speed of 112 RPM, has pressed the “1” key twice and is about

to press the “2” key. If the user makes more than ve (5) key presses, the DV-III Ultra control

program will “roll” the cursor back to the rst character of the eld and begin to overwrite the

previous data entry.

Next the user presses the

ENTER key to accept the speed. The motor will begin running at 112 RPM

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 132 133

Sin comentarios

Brookfield DV-III Ultra Rheometer Manual de usuario Pagina 23